Natuzzi Recliner Sofa Cable Replacement

By | May 10, 2019

Essential Aspects of Natuzzi Recliner Sofa Cable Replacement

Natuzzi recliner sofas are renowned for their comfort and style, but over time, the cables that control the reclining mechanism can become damaged or worn out. Replacing these cables is a relatively simple task that can be completed in a few steps.

Required Tools and Materials

*
  • Replacement cables (available from Natuzzi or third-party suppliers)
  • *
  • Phillips head screwdriver
  • *
  • Flathead screwdriver
  • *
  • Electrical tape
  • Step-by-Step Guide

    1. Safety First
    Before starting, ensure the sofa is unplugged from the power outlet. This will prevent any electrical shocks.

    2. Locate the Cables
    Flip the sofa upside down and locate the recliner mechanism. The cables will be attached to the mechanism and extend to the control panel on the sofa's side.

    3. Disconnect the Old Cables
    Using a Phillips head screwdriver, loosen the screws that secure the cables to the mechanism. Gently pull the cables away from the mechanism.

    4. Prepare the New Cables
    Measure the length of the old cables and cut the new cables to the same length. Strip about 1/2 inch of insulation from each end of the new cables.

    5. Connect the New Cables
    Connect the new cables to the mechanism, ensuring that the colors match the old ones. Tighten the screws to secure the cables.

    6. Route the Cables
    Route the cables neatly along the frame of the sofa, avoiding any sharp edges or obstructions.

    7. Connect to the Control Panel
    Connect the cables to the control panel, again ensuring that the colors match. Tighten the screws to secure the cables.

    8. Test the Recliner
    Plug the sofa back into the power outlet and test the recliner by pressing the buttons on the control panel. The sofa should now recline smoothly.

    9. Finish Up
    If the recliner is working correctly, wrap electrical tape around each connection to provide additional support and prevent the cables from becoming loose.

    By following these steps, you can successfully replace the cables on your Natuzzi recliner sofa and restore its functionality. If you encounter any difficulties or prefer professional assistance, don't hesitate to contact Natuzzi or a qualified technician.


    Recliner Cable Chair Cables

    Recliner Cable Chair Cables Sofa Handle Replace Part Couch Replacement Rings Release Pull Com

    Sofa Recliner Cables 2 Pack Couch

    Sofa Recliner Cables 2 Pack Couch Release Replacement Parts

    How To Repair A Natuzzi Recliner Cable

    How To Repair A Natuzzi Recliner Cable Quora

    Quality Best Er Replacement

    Quality Best Er Replacement Recliner Chair Sofa Release Cable 5mm Barrel

    Recliner Foot Rest D Ring Repair Fast

    Recliner Foot Rest D Ring Repair Fast Natuzzi And Others

    Recliner Foot Rest D Ring Repair Fast

    Recliner Foot Rest D Ring Repair Fast Natuzzi And Others

    Adapter Lead For Standard Transformer

    Adapter Lead For Standard Transformer To Ciar Natuzzi

    How To Repair A Natuzzi Recliner Cable

    How To Repair A Natuzzi Recliner Cable Quora

    Recliner Foot Rest D Ring Repair Fast

    Recliner Foot Rest D Ring Repair Fast Natuzzi And Others

    Cable Sofa Recliner Chair Couch Release

    Alloy Handle Cable Sofa Recliner Chair Couch Release Lever Trigger Replacement

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.